Downloads

  1. Ammonia Analyzer - Economical (NH3, H2O) Datasheet
    5/11/2017

    LGR’s Ammonia Analyzer provides sensitive measurements of ammonia (and water vapor) in ambient air or in industrial process flows with extremely high precision and sensitivity.

  2. Carbonyl Sulfide Analyzer (OCS, CO2, CO, H2O)
    5/11/2017

    To address exciting new opportunities for studying gross photosynthesis, LGR's OCS Analyzer (Carbonyl Sulfide or COS) simultaneously reports measurements of carbonyl sulfide (OCS or COS), carbon dioxide (CO2), carbon monoxide, and water vapor (H2O) in air continuously with extraordinary precision and sensitivity.

  3. Carbonyl Sulfide Analyzer (OCS, CO2, CO, H2O) Datasheet
    5/11/2017

    Since OCS uptake by vegetation is associated with photosynthetic CO2 uptake, but not with respiration, simultaneous measurements of OCS and CO2 may serve as a new and potentially powerful method to study gross photosynthesis.

  4. Methane/Ethane Analyzer (CH4, C2H6) Datasheet
    5/11/2017

    LGR’s new Fast Methane/Ethane Analyzer (FMEA) reports measurements of methane and ethane, the two major components of natural gas, simultaneously. The analyzer is available in either the acclaimed ultraportable or rackmount package.

  5. CO/CO2 Analyzer (CO, CO2, H2O)
    5/11/2017

    LGR's new CO/CO2 Analyzer simultaneously measures ambient levels of carbon monoxide, carbon dioxide and water vapor with extraordinary precision in real time.  Of course, higher precision may be achieved with modest averaging.  (For simultaneous measurements of N2O and CO, please refer to LGR's N2O/CO Analyzer.) The instrument may be set up in minutes and does not require any cryogens or consumables. In addition, the Analyzer simultaneously measures water vapor mixing ratios with very high precision and accuracy. As a result, the instrument also reports the measured gases on a dry mole fraction basis accurately in real time without the need for sample drying, empirical corrections, or any post processing.

  6. Carbon Dioxide Analyzer (CO2, H2O)
    5/11/2017

    Insensitive to other atmospheric gases, the Carbon Dioxide Analyzer measures carbon dioxide and water vapor in ambient air with unsurpassed accuracy and precision. All without the need for frequent external calibration. The instrument can store data practically indefinitely on its internal hard disk drive and can send real-time data to a data logger through its analog, digital (RS232), and Ethernet outputs allowing unattended long-term standalone operation.

  7. Methane/Acetylene Analyzer (CH4, C2H2, H2O) - Ultraportable
    5/11/2017

    LGR’s new Ultraportable Methane/Acetylene Analyzer (UMAA) reports measurements of methane, acetylene and water vapor simultaneously in a package that is compact, crushproof and travels anywhere. Small enough to be carried on-board aircraft (TSA approved size) and requiring about 60 watts (including pump), the UMAA offers opportunities to measure anywhere. As with all LGR instruments, the UMAA is simple to use which makes it ideal for landfill tracer studies, compliance monitoring, leak detection, air quality studies, process monitoring, and wherever measurements of methane, acetylene and water vapor are needed.

  8. N2O/CO Analyzer (Nitrous Oxide, Carbon Monoxide)
    5/11/2017

    LGR's N2O/CO Analyzer (Nitrous Oxide and Carbon Monoxide Analyzer) is the first instrument capable of continuously measuring ambient levels of nitrous oxide and carbon monoxide (with precision better than 0.1 ppb in 1 second) in real time (data rates to 10 Hz with optional external pump). Users can set up the instrument in minutes. Since CO is an excellent tracer of anthropogenic emissions, simultaneous measurements of CO and N2O can allow scientists to correlate the sources of N2O emissions.  TheN2O/CO Analyzer now also simultaneously measures water vapor  mole fraction. As a result, the instrument reports N2O and CO on a dry mol basis (accurately corrects for water vapor dilution and absorption line broadening effects) without the need for sample drying or empirical corrections.   (For simultaneous high precision measurements of CO and CO2, please refer to LGR's CO/CO2 Analyzer.)

  9. Industrial Emissions Analyzer (CO, CO2, H2O, O2) Datasheet
    5/11/2017

    LGR’s new Industrial Emissions Analyzer (CO, CO2, H2O, O2), or IEA, is the first laser-based instrument capable of simultaneous measurements of carbon monoxide, carbon dioxide, water vapor and oxygen.

  10. Hydrogen Sulfide Analyzer (H2S)
    5/11/2017

    LGR’s Hydrogen Sulfide Analyzer (H2S Analyzer) measures H2S in ambient air and in industrial processes with extremely high precision, sensitivity and accuracy. No longer do you have to wait a long time to measure hydrogen sulfide gas with high reliability – LGR’s H2S Analyzer provides measurements every second with extremely high precision. In addition, the H2S Analyzer can report measurements quickly over a very wide range of H2S mole fractions even in complex process flows.