Fluctuations in atmospheric pressure can heavily influence how much natural gas leaks from wells below the ground surface at oil and gas sites, according to new University of British Columbia research
The U.S. Environmental Protection Agency (EPA) recently approved Arkansas clean-air plan related to transporting air pollution across state lines, known as interstate transport
Aries Clean Energy was joined by local officials and dignitaries to break ground on New Jersey’s first biosolids-only gasification facility on Tuesday
Wells Fargo announced recently a 10-year structured renewable energy agreement with Reliant, an NRG Energy company
Startup company, Darlema Corp unveils new automobile engine called the CWPSC (Combustion with Pre-Stage Compression) that doubles gas mileage and reduces carbon emissions by 50%
Leyline Renewable Capital, a provider of development financing across several renewable energy sectors, announced a $150 million investment by Newlight Partners LP
The MT86 insertion type multipoint mass flow meter combines FCI's highly reliable thermal dispersion, no-moving parts flow element design with up to 16 flow sensing points while operating over a wide temperature range up to 850° F [454° C]. The electronics features continuous built-in testing and calibration adjustment to prevent signal drift.
LGR's new Ammonia Analyzer - Trace (AAT) provides fast measurements of ammonia in ambient air with unparalleled precision, sensitivity and time response. No longer do you have to wait for minutes before getting a reliable reading – LGR’s AAT provides measurements at 10 Hz with sub-ppb precision. In addition, the AAT can report measurements quickly over a wide range of ammonia concentrations. For your convenience, we offer two versions of the AAT. If you require the fastest response rate possible (data rate up to 10 Hz), you will want to use our Ammonia Analyzer - Trace (Fast Flow). For applications requiring measurements of NH3 with highest accuracy, you’ll want the Ammonia Analyzer – Trace (Enhanced Performance).
SOLVAir Select 200 trona (a natural form of sodium sesquicarbonate) offers a high-assay, low-cost alternative to acid neutralization.
Aries Clean Energy was joined by local officials and dignitaries to break ground on New Jersey’s first biosolids-only gasification facility on Tuesday
Wells Fargo announced recently a 10-year structured renewable energy agreement with Reliant, an NRG Energy company
Startup company, Darlema Corp unveils new automobile engine called the CWPSC (Combustion with Pre-Stage Compression) that doubles gas mileage and reduces carbon emissions by 50%
Leyline Renewable Capital, a provider of development financing across several renewable energy sectors, announced a $150 million investment by Newlight Partners LP
Consumer Energy Alliance (CEA) recently released an analysis of U.S. government emissions data that looks at key pollutants and the overall environmental improvements seen across New York, which shows that statewide emissions have fallen by as much as 95 percent since 1990 even as the state’s energy demand remained strong and natural gas usage surged
New Pig Corporation, the world's leading provider of products to control leaks, drips and spills, today released the Stormwater Management Survey, an in-depth look at how well businesses understand the problems presented by contaminated stormwater discharge and the strategies used to mitigate the issue.
SOLVAir Solutions has been in the business of air pollution control for more than 25 years, offering effective products to the market such as SOLVAir Select 200 trona and SOLVAir Select 300 and 350 sodium bicarbonate, and expert knowledge of Dry Sorbent Injection (DSI).
EPA is no longer accepting paper submittals of the Notification of Compliance Status (NOCS) for Energy Assessments for area source boilers. We now require the NOCS to be submitted electronically to the Compliance and Emissions Data Reporting Interface (CEDRI). For further information, please see the implementation videos.
The US Environmental Protection Agency (EPA) and industry groups including cement producers have failed to settle a permit dispute that is testing whether the agency has the authority to require operators of hazardous waste combustion units to conduct risk assessments that can be used to strengthen emissions limits for mercury and other pollutants when renewing the facilities' existing waste and air permits. Negotiations stalled during a meeting in November 2013 between EPA lawyers and cement kiln operators at EPA's Region V offices, according to an 8 January 2014 status report the parties filed with the Environmental Appeals Board (EAB). Litigation will continue on 20 February 2014.
On January 31, 2013, U.S. EPA published the final Boiler MACT in the Federal Register. This sets the existing source compliance date as January 31, 2016.
EPA is reopening, for 60 days, the public comment period on the startup and shutdown provisions included in the November 2012 proposed updates to pollution limits for new power plants under Mercury and Air Toxics Standards.
Fluctuations in atmospheric pressure can heavily influence how much natural gas leaks from wells below the ground surface at oil and gas sites, according to new University of British Columbia research
The U.S. Environmental Protection Agency (EPA) recently approved Arkansas clean-air plan related to transporting air pollution across state lines, known as interstate transport
Aries Clean Energy was joined by local officials and dignitaries to break ground on New Jersey’s first biosolids-only gasification facility on Tuesday
Wells Fargo announced recently a 10-year structured renewable energy agreement with Reliant, an NRG Energy company
Startup company, Darlema Corp unveils new automobile engine called the CWPSC (Combustion with Pre-Stage Compression) that doubles gas mileage and reduces carbon emissions by 50%
