Downloads

  1. Manufacturer Of Floor Coverings Chooses Tri-Mer
    2/4/2019

    A manufacturer of floor coverings used vent filters on raw material silos. One, fitted to a silo that was filled and emptied constantly, was subject to vibration and fluctuations in pressure and dust loading. It had to be lifted to ground level every three months so bags could be changed and cages repaired.

  2. SorbSaver Injection Technology for Dry Sorbent Injection
    2/4/2019

    SorbSaver is a simple, cost-effective retrofit for dry sorbent injection / activated carbon injection systems

  3. Wet Dust Collection For Dry Fertilizer Dusts
    1/11/2019

    Efficient dust collection, plus product recovery benefit fertilizer manufacturer.

  4. Whirl Wet Dust Collector For Breading Line
    1/11/2019

    Fishery Products International, a division of ConAgra, chooses Tri-Mer.

  5. UltraCat Catalytic Filter System For DeNOx / Selective Catalytic Reduction
    1/11/2019

    Selective Catalytic Reduction (SCR) is the process of NOx reduction, or DeNOx, that occurs when a NOx source is mixed with ammonia and allowed to react at the surface of a catalyst.

  6. UltraCat Ceramic Filter Systems For Waste Incineration, Coal Combustion, Boilers
    1/11/2019

    Tri-Mer Ceramic Filter Systems are 99%+ efficient for the collection of submicron particulates.

  7. Wet Dust Collection For Dry Ingredients
    1/11/2019

    Wax products producer achieves 99% efficiency using Tri-Mer Dust Collection Equipment.

  8. UltraCat Catalytic Filter Systems For Chrome / Hexavalent Chrome
    1/11/2019

    Hexavalent chromium, Chromium VI, is one of the valence states (+6) of the element chromium. It is usually produced by an industrial process. Chromium (VI) is known to cause cancer. In addition, it targets the respiratory system, kidneys, liver, skin and eyes.

  9. Multi-Pollutant Control – Control PM, SO2, HCl, NOx, Dioxins, HAPS With One Single System
    1/11/2019

    UltraCat Catalytic Filters are composed of fibrous ceramic materials mixed with nanobits of proprietary catalyst.

  10. Fume Exhausters For Metal Finishing And Chemical Processing Equipment
    1/11/2019

    Tri-Mer Fume Exhausters have housings of solid polypro or PVC, so corrosion-resistance is high, and there is no risk of delamination. Impellers have a backwardly-inclined, non-overloading design.