Product Showcase

  1. Calibrator Certification Service
    10/29/2014

    The Thermo Scientific Calibrator Certification Service compares and validates the Thermo Scientific Model 81i Mercury Calibrator to a NIST (National Institute of Standards and Technology) traceable Vendor Prime or Field Reference Generator. The calibration method is based on the Interim Draft Traceability Protocol as set forth by NIST and the Environmental Protection Agency (EPA).

  2. SOLA II Flare Sulfur On-Line Analyzer
    9/16/2014

    Reliably capture and report all significant sulfur emission quantities with the Thermo Scientific™ SOLA II Flare Sulfur On-Line Analyzer, featuring an unparalleled response time and a wide measurement range. This highly accurate instrument enables reliable flare stack sulfur emission monitoring by providing a measuring range from 10 ppm to 95% S by volume and fast high-to-low response time. The field-proven SOLA II Flare continuously monitors the total sulfur content in flare feeds, enabling immediate corrective action without lab analysis delays.

  3. Model 82i Mercury Probe Controller
    8/25/2014

    The Thermo Scientific Model 82i probe controller is microprocessor-driven and connected by an umbilical to the stack probe and mercury converter. The controller automates probe calibration and dynamic spiking, and confirms auto dilution. It also monitors probe temperature, measures flow rates and pressure in the sampling loop, and enables automated filter blowback.

  4. Model 80i Mercury Analyzer
    8/25/2014

    The Thermo Scientific Model 80i analyzer uses an advanced cold vapor atomic fluorescence technology. This technology enables the Model 80i analyzer to provide continuous sample measurement, with no additional gases or accumulations required and virtually no interference from SO2. High sensitivity allows high sample dilution reducing moisture, heat, and interfering pollutants.

  5. Model 81i Mercury Calibrator
    8/25/2014

    The Thermo Scientific Model 81i calibrator utilizes a vapor generator that allows standard calibration and dynamic spiking into the extraction probe. A wide calibration range lets the user directly calibrate the analyzer at post-dilution concentrations. The calibrator is ideally suited for daily zero/span checks and routine converter efficiency and linearity testing.

  6. Model 5020i Sulfate Particulate Analyzer
    8/25/2014

    The Thermo Scientific 5020i SPA analyzer ensures accurate sampling and complete data capture of particulate laden flow.

  7. FCI MT86 Multipoint Mass Flow Meter
    7/22/2014

    The MT86 insertion type multipoint mass flow meter combines FCI's highly reliable thermal dispersion, no-moving parts flow element design with up to 16 flow sensing points while operating over a wide temperature range up to 850° F [454° C]. The electronics features continuous built-in testing and calibration adjustment to prevent signal drift.

  8. Thermo Scientific TVA2020 Toxic Vapor Analyzer
    3/19/2014

    The Thermo Scientific™ TVA2020 Toxic Vapor analyzer is the only intrinsically safe, portable field analyzer using both Flame Ionization Detection (FID) and Photo Ionization Detection (PID) technologies.

  9. Multispectral Infrared Camera: MS-IR
    3/13/2014

    The MS-IR uses a high-speed filter wheel to perform 8-channel multispectral target signature analysis. Its user adjustable rotating speed can go up to 100 Hz, meaning it can support an up to 800 fps frame rate. The camera’s high dynamic range ensures the highest possible contrast and accuracy in the images it captures.

  10. High Performance Infrared Cameras: HDR-IR Series
    3/13/2014

    This series of high performance infrared cameras can be used to resolve targets up to 2500oC. High dynamic ranges ensure high contrast and accuracy in the images captured and thermal sensitivity allows for the detection of temperature differences as small as 20 mK.