USDA Approved 3A Dairy Blower Aftercooler has 2b Interior and HEPA Filter
Source: Xchanger, Inc.
By combining the heat exchanger to remove heat of compression after a blower with a HEPA filter to remove any
By combining the heat exchanger to remove heat of compression after a blower with a HEPA filter to remove any minute contaminants, this unit does two jobs in one. The special requirements of the USDA are designed into this heat exchanger which is used to aftercool a blower in a cheese curd pneumatic conveying system. The HEPA filter is easily accessible through the hinged door, which is secured with hand knobs. This unit is designed to cool 2,000 SCFM air at 15 PSIG from 350ºF to 70ºF.
A dial indicator reads the pressure drop across the HEPA filter, making it simple to determine when it's time to swap it out. The top is "tented" for quick run-off after wash down. The internal drain pan has an X-brake to ensure immediate removal of all condensate.
Xchanger, Inc., 1401 South 7th Avenue, Hopkins, MN 55343. Tel: 612-933-2559; Fax: .
This website uses cookies to ensure you get the best experience on our website. Learn more