Rubberizer Oil Sorbing Mats
Source: Haz-Mat Response Technologies, Inc.
The Rubberizer Oil Sorbing & Solidifying Mats are designed to be deployed in any situation where covering the surface of a body of water is desirable (i.e. in sump pumps, oil water separators, etc.)
The Rubberizer Oil Sorbing & Solidifying Mats are designed to be deployed in any situation where covering the surface of a body of water is desirable (i.e. in sump pumps, oil water separators, etc.) They can be used as sweeps for fuel pits or on puddles, lakes, rivers, bays, etc. and areas of pooling water with oil contamination problems. The primary advantages of the Rubberizermat over a boom or pillow is the large surface areas which the mat covers. The primary advantage of the Rubberizer mat over the particulate is the control and retrievability of material. They are designed to absorb and solidify up to 3/4 gallon per square ft of fuels, oils, or solvents. They are constructed from high-strength fiberglass mesh screen with Ribbon loops for tethering. They contain Rubberizer Filter Media as an absorbing/solidifying filler. These units are low maintenance and can be rapidly retrieved and replaced when loaded with oil. They are available in a variety of sizes, which can be combined to fit virtually any situation.
| Combine Various Models For Almost any Geometric Size |
| Part # | Product Description |
Packaging | Approx. Ship Weight |
| RM2X2B2 | 2' x 2' 1 Ribbon Pick Point | 1/Box | 5 lbs/Box |
| RM2X3B1 | 2' x 3' 1 Ribbon Pick Point | 1/Box | 8 lbs/Box |
| RM3X3B1 | 3' x 3' 2 Ribbon Pick Point | 1/Box | 11 lbs/Box |
| RM4X4B1 | 4' x 4' 2 Ribbon Pick Point | 1/Box | 19 lbs/Box |
Standard fill weight is 1 lb of 16-8 Mesh Rubberizer Filter Media per square ft. Absorption/Solidification capacity is approximately 3/4 gallon/sq ft. |
|||
Haz-Mat Response Technologies, Inc., 4626 Santa Fe Street, San Diego, CA 92109. Tel: 858-459-3383; Fax: 858-459-3173.