Product/Service

Out of stack system Dilution CEMS

Source: Global Environmental Marketing, LLC
Out of stack system Dilution CEMS
The EPM Out of Stack (OOS) Dilution System is designed for emission monitoring applications where in-stack installation of the well known EPM dilution probe system is impractical.
The EPM Out of Stack (OOS) Dilution System is designed for emission monitoring applications where in-stack installation of the well known EPM dilution probe system is impractical. It uses the same basic sampling technology as our popular conventional in-situ dilution probe, yet all critical parts are mounted externally for quick access and easy maintenance.

4" and 6" 150 Ibs flange mounting adaptors are available in 316L stainless steel, Inconel 600 or Hastelloy. They can be supplied as separate parts or as complete adaptor kits, Some of the key advantages of the OOS Sampling Systems are listed below:

FEATURES

  • Designed for easy access to consumable and replacement parts.
  • Heated sampling assembly utilizes dual 400 W heaters.
  • Easy dynamic in-situ calibration.
  • Low sample flow rate utilizes bypass pump for sampling protection.
  • Corrosion resistant design, available in 316L stainless steel, Inconel 600 and Hastelloy C-22.
  • Selectable dilution ratios.
  • Blowback port for manual or automatic operation.
  • Integral mounting flange and optional adapters.

Global Environmental Marketing, LLC, P.O. Box 51960, Sparks, NV 89435. Tel: 775-351-3000; Fax: 775-351-3001.