Product/Service

NUCON NUSORB®

Source: NUCON International Inc.

NUCON offers NUSORB activated carbon products in a wide variety of applications. These NUSORB products include both activated carbons and impregnated carbons produced from a variety of raw materials.
NUCON offers NUSORB® activated carbon products in a wide variety of applications. These NUSORB® products include both activated carbons and impregnated carbons produced from a variety of raw materials. They are available in various particle types and size distributions to optimize your application. NUCON offers more than simply carbon as a commodity, we provide a full range of consulting, laboratory services, bench & pilot scale modeling and field services to ensure the customer receives the best adsorbent for his application. Sometimes it is impossible to specify the optimum adsorbent until actual field data is obtained or until laboratory work is performed to determine the precise adsorption characteristics necessary to optimally meet the customer requirements.

NUCON NUSORB® activated carbons are available as follows:

    Carbon grades from coal as pellets with diameters of 1.5, 3 and 4 mm. Carbon grades from coconut shells as irregularly shaped granules up to 6 mesh.
    Carbon grades from wood with high surface area as powder.

When unimpregnated carbon is not sufficiently effective in removing vapor phase contaminants from a gas stream, an impregnated NUSORB® product is required. The addition of impregnants will enhance the adsorptive capabilities and allow a wide range of applications and increase performance. NUCON has the technical capabilities to provide the best impregnated carbons for each application based on our in-house expertise. If one of our standard impregnated products does not meet your requirements NUCON can develop a custom impregnated NUSORB® for your application.

NUSORB® products are available in whatever quantity you require, from a few pounds to full container or truck loads. Shipment of many types is from stock. Long term contracts are available for assured supply to meet your schedules anywhere in the world. NUCON has a fully qualified Quality Assurance Program that oversees the quality of our NUSORB® products. NUCON has in-house laboratory capability for physical, chemical and radiological testing for your adsorbents. A listing of common applications with recommended NUSORB® products are available with the following.

  • Industrial applications
  • Nuclear/defense applications
Additional details are available for each application by clicking on the recommended NUSORB® . A NUCON NUSORB® APPLICATION DATA FORM is included for your use. Please complete it so we can analyze your needs and recommend the best NUSORB® for your application. E-MAIL, FAX or mail it to us. We look forward to working with you to meet your adsorbent needs in the most cost effective manner possible.

NUCON International Inc., 7000 Huntley Road, P.O. Box 29151, Columbus, OH 43229-1022. Tel: 614-846-5710; Fax: 614-431-0858.