The Model XP 110 Expendable Purge and Sampling Mini Pump System is simple to operate pump system suitable for sampling water from small diameter (2 inch ID) steel and PVC monitoring wells
MODEL XP 110 SERIES MINI PUMP SYSTEM
Pumping Unit XP 110
Power source: 12 volt or car battery
Pump lift: XP 110-30 0-30 ft XP 110-60 0-60 ft
Dimensions: 1.45" X 5" length and 0.30 lb weight
Materials: Molded ABS case, stainless steel rotor and shaft, PVC jacketed 16-gauge cable
Electronic Control Box
Adjusts pumping rate at ambient pressure
300 - 8500 ml/min
The Model XP 110 Expendable Purge and Sampling Mini Pump System is simple to operate pump system suitable for sampling water from small diameter (2 inch ID) steel and PVC monitoring wells. The electric pump is tightly sealed and designed to work while submersed in water. Water flow is adjustable and controlled electronically.
The pumping unit can be easily detached, disposed and replaced with the fresh one to avoid water cross-contamination. Thus, time consuming decontamination of the equipment can be avoided.
Submersible pumps are superior to peristaltic ones in many cases of sampling. According to USGS Open File Report 84.475, "…sampling by peristaltic pump loses approximately one half of the volatile organic compounds present in the sample when compared with submersible pump."
Using the XP 110 Series Mini Pump System insures that critical analyses for field investigations can be performed with great accuracy and lower investment costs.
KVA, Madaket Place B12/13, 766 Falmouth Road, Mashpee, MA 02649. Tel: 508-539-3002; Fax: 508-539-3566.