A compact mobile separator unit cleans a range of oils including hydraulic oils and lube oils in a single operation.
The separator, Emmie, removes 99% of particles in the 2 to 5 micrometer range while it also can remove virtually all free water, even at high initial water content.
The separator is designed to "plug and go." The unit is plugged into a 230 or 110 V power source, the hoses are connected to the oil tank and the unit is ready. Dirty oil is pumped from the tank, cleaned and then recirculated. The module can be wheeled around among oil tanks, to serve many different production stations.
The system incorporates a screw pump, a pressure gauge and a built-in electric heater, which heats the oil to reach optimum viscosity prior to purifying. The separator can clean up to 170 L of oil per hour. Two different bowls allow the unit to be used as either a purifier or a clarifier.
For more information, contact:
Alfa Laval AB, Industrial Separation, SE-147 80 Tumba, Sweden