Product/Service

Marine Oil/Water Separator

Source: Hyde Marine Inc.
Marine Oil/Water Separator
This separator uses Hyde's method for gravity separation of
This separator uses Hyde's method for gravity separation of oil from bilge water to less than 15 ppm. The separator exceeds all performance requirements of U.S. Coast Guard 46CFR162.050 and IMO Resolution MEPC.60 (33) and is certified by the U.S. Coast Guard. Benefits of this system include:

•No replacement filters or cartridges needed
•Requires minimal maintenance
•No moving parts
•Simple, reliable operation
•Proven serviceability on hundreds of ships and portside facilities
•Low initial cost, minimal operating costs
•Handles solids and heavy oils
•9 USCG certified models from 1.5 to 20 GPM (metric models 0.5 to 4.0 m3/hr)
•Self-contained design complete with supply pump, controls and monitor, if required
•Easy installation
•No air, steam or backflush connections are required
•Adaptable to any certified bilge alarm or monitor
•Explosion-proof versions available for all models

Hyde Marine Inc., 28045 Ranney Parkway, Cleveland, OH 44145. Tel: 440-871-8000; Fax: 440-871-8104.