Working inside diameter of tank car 93" to 111"
Minimum manway inside diameter 18"
Maximum manway 22" (may be adapted to larger opening)
Overall length extended 16'-6"
Overall length rotated 12'-9"
Operational length prop to prop 7'-11"
Four pinned operation positions, one at 12" above center line
Two position adjustable foot
Approximate weight (less hydraulic hose) 1120 pounds
Maximum power per prop 70 HP
Props, collapsible, stainless steel
Prop motor seals: teflon material; two lip seals
Stainless steel on known contact points
Stainless steel side and locking arm system
Mechanical lock in operating position
Rotation cylinders; teflon seals
Flexible hydraulic hose; stainless steel braided teflon with spring protection guards
Top section urethane foam filled for vapor barrier
Aluminum manway cover
The power unit is skid mounted with lifting eyes
100' hydraulic hose sets
Volumetric hydraulic flow control to each prop
Thermostatic oil reservoir immersion heater
Four hydraulic pumps for power supply to all functions
Fan cooled radiator type oil cooler
Hydraulic power unit controls for emergency power shut down
Warning light & shut downs for low oil level/high oil temperatures
Explosion proof electronic solenoid valves
Electric Class 1, Group D, division 2, explosion proof power unit includes: explosion proof 150 horsepower motor (adapts to clients MCC); circuit breaker (s); explosion proof junction box(es); intrinsically safe functional control system and safety shut downs; hand held control box with 100 foot cable for Power Unit Start, Power Unit Stop Props, Rotate, Lock
Liquid Waste Technology, Inc. (LWT), 422 Main Street (Box 250), Somerset, WI 54025. Tel: 800-243-1406; Fax: 715-247-3934.