Product/Service

Low Pressure Liquid Phase Carbon Adsorbers

Source: Carbonair Environmental Systems

Low Pressure Liquid Phase Carbon Adsorbers
Carbonair's low pressure carbon adsorbers are typically used in gravity discharge or low pressure water treatment applications.
Carbonair's low pressure carbon adsorbers are typically used in gravity discharge or low pressure water treatment applications. The adsorbers are designed and manufactured in accordance with engineering standards set forth by the American Society of Mechanical Engineers. The materials used in construction are in accordance with standards established by AWWA, FDA and EPA.

Low Pressure Carbon Adsorber Specifications

MODEL LPC 3 LPC 3.85 LPC 5 LPC 7 LPC 13 LPC 20
Diameter 24.5" 26" 30" 3 ft 4 ft 5 ft
Height 2.8 ft 3.02 ft 5.83 ft 6.83 ft 6.83 ft 6.83 ft
Bed Area (sq ft) 2.6 3.68 4.91 7.7 12.57 1963
Flow Range (gpm) 1-10 1-13 3-35 4-70 6-90 10-130
Carbon Capacity (lbs) 200 250 500 1,000 1,500 2,500
Fittings 1" NPT 1.5" NPT 2" FL 2" FL 2" FL 3" FL
Design Pressure (psi) 10 5 15 15 15 15
Empty Weight (lbs) 50 100 680 880 1,280 1,650
Loaded Weight (lbs) 250 350 1,180 1,880 2,780 4,150
Operating Weight (lbs) 423 725 2,380 3,680 6,280 9,650
Drained Weight (lbs) 355 600 1,380 2,280 3,380 5,150

Standard Features

  • Low-pressure vessel
  • DOT approved 55-gallon steel drum (LPC 3 & 3.85)
  • Quick installation
  • Welded steel construction (LPC 5 through 20)
  • 15 psi maximum design pressure
  • 16" diameter bolt on manway
  • Fork tubes for easy lifting
  • 150 lb. influent/effluent connections
  • Bolt down lugs
  • 3/4" drain coupling
  • PVC hub and lateral distributor
  • Polyamide epoxy interior lining
  • Polyamide epoxy/urethane exterior finish
Optional Components
  • External piping kit
  • External sample/gauge kit
  • Influent/Effluent quick connect kit
  • Influent/Effluent sample & pressure kit
  • Quick connect industrial hose
  • Sample ports
  • Flow instrumentation