Product/Service

Fluorocarbon Resin Treatment

Source: BWF America, Inc.

CS-17 dust release treatment is engineered for the separation and release of wet, oily, fatty, sticky and agglomerating dust
BWF America, Inc. dust release treatment is engineered for the separation and release of wet, oily, fatty, sticky and agglomerating dust. Each fiber is encapsulated with the treatment providing release both from the surface as well as from the depth of the filter media.

Since the surface of the felt is also finished, very high separation rates are achieved, keeping the dust cake on the surface of the felt. However, any particulate that does penetrate the slick surface coating is more easily released from the treated fibers below the surface.

Advantages of CS-17

  • Superior release of difficult dusts
  • Reduced blinding and clogging
  • Higher flow rates
  • Longer bag life
  • Lower pressure drop
  • High separation rates

    AvailabilityBWF America, Inc. dust release treatment is available on polypropylene (standard and high temperature), polyester, homopolymer acrylic, Nomex, Ryton and P-84 felts.

    <%=company%>, 7453 Empire Drive #340, Florence, KY 41042, Tel: (859) 282-4550, Fax: (859) 282-4555