Product/Service

Flue-gas Analyzers

Source: AMETEK/Dixson

Flue-gas Analyzers
The WDG-IV and WDG-IVC flue-gas analyzers with the Series 2000 control unit use a zirconium oxide...
Request Information

The WDG-IV and WDG-IVC flue-gas analyzers with the Series 2000 control unit use a zirconium oxide rapid-response oxygen sensor. The WDG-IVC also measures combustibles using a pellister-style combustibles detector. With the Div 2 option, these analyzers are third-party certified for NEC Class 1, Division 2, Groups B, C and D hazardous areas. The Div 2 option analyzers come in wall-mounted, NEMA 4X (IP56) hinged enclosures with a NFPA 496 Z-purge apparatus and flame arrestor.

The sensor carries a temperature code of 165 °C. The Series 2000 control unit is approved for Class 1, Division 2 hazardous areas without a Z-purge apparatus. It can be mounted next to or remotely from the WDG-IV/IVC analyzer and comes in enclosures rated NEMA 4 (IP56), NEMA 4X (IP56), or for general-purpose. The control unit has a temperature T4 code (135 °C). These analyzers are fully CE compliant and UL/C-UL classified for general-purpose applications.

Ametek, 150 Freeport Road, Pittsburgh, PA 15238. Tel: (412) 828-9040; Fax: ( 412) 826-0399; Internet: http://www.ametek.com

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information