Product/Service

Custom Or Standard O-Rings And Seals

Source: Designed Mechanical Components, Inc.

Custom Or Standard O-Rings And Seals
Custom or standard o-rings and seals meeting your exacting specifications for resilience, fluid, pressure, seat or
Custom or standard o-rings and seals meeting your exacting specifications for resilience, fluid, pressure, seat or vacuum sealing will be supplied. A wide range of materials, including natural rubber and synthetic elastomers is available. The choice would depend on the environment and application to which the part would be exposed.

Selection would be based on whether yours is a static or dynamic application and if it will be used for sealing a rod or a piston. The range of temperature (high, low, and average operating conditions) must be noted. The mediums to which the seal will be exposed (chemicals, oil, water, air) and psi (pounds per inch of pressure -high, low, and average operating conditions) are also critical elements in the choice for the best component for your project. We will also provide o-ring kits when required.

Just send us your drawings and specs or call us toll-free to discuss your requirements. We will help you solve problems.
Simplify your buying decisions. Consider us your single source for all your mechanical components.

Designed Mechanical Components, Inc., P.O. Box 2925, Cherry Hill, NJ 08034-0260. Tel: 888-452-7211; Fax: 888-220-8349.