Product/Service

Chiperator™ Chip And Coolant Separation System.

Source: Abanaki Corporation - Oil Skimmer Division

chiperator.jpg
The air driven Chiperator vacuums and filters old cutting fluids loaded with chips from machine sumps, tanks and parts washers

Visit our Website

Click Here To:
Brochure: Chiperator™
View the Chiperator™ Animated Demo

Chip and Coolant Separation System. The air driven Chiperator vacuums and filters old cutting fluids loaded with chips from machine sumps, tanks and parts washers. When the optional Abanaki's Lil' Blue™ skimmer is purchased, the coolant will also be cleansed of tramp oils.

Save money by making old coolant useable again. The Chiperator is an inexpensive way to clean dirty machine sumps. The air driven Chiperator quickly separates chips and swarf from liquids. It drains or refills its 55 gallon drum in less than 2 minutes! Simply suck up coolant laden with chips, swarf and muck, and the Chiperator strains the unwanted solids. The Chiperator then pumps the strained coolant back to the sump.

Standard Features:

  • Strains 40 gallons of chips and coolant per minute
  • Efficient venturi design consumes less air than competitive models
  • Acts as both a vacuum and a pump
  • Economical, disposable filter bags make cleanup a breeze
  • Filters out chips and shavings from plastic, steel, aluminum, ceramic, etc.
  • Quiet; less noise than other air driven or electrical units
  • No moving parts
  • Equipped with float valve to automatically shut off unit when drum is full
  • Equipped with automatic pressure relief valve for added safety
  • Complete with on/off valve for easy shutoff

Click Here To:
Brochure: Chiperator™
View the Chiperator™ Animated Demo