INDUSTRY NEWS

More News

FEATURED PRODUCTS

  • UltraCat
    UltraCat

    Tri-Mer catalytic high temperature filters remove particulate (PM), NOx, SO2, HCl, and other acid gases treated at over 90% removal. The filters operate up to 1650°F.

  • SOLVAir® Select 200 trona For Removal Of HCl, SO<sub>2</sub> and SO<sub>3</sub>
    SOLVAir® Select 200 trona For Removal Of HCl, SO2 and SO3

    SOLVAir Select 200 trona (a natural form of sodium sesquicarbonate) offers a high-assay, low-cost alternative to acid neutralization.

  • EM Features Software Special Air & Waste Management's July 1997 issue of EM contains the 1997 "Guide to
  • Thermo Scientific TVA2020 Toxic Vapor Analyzer
    Thermo Scientific TVA2020 Toxic Vapor Analyzer

    The Thermo Scientific™ TVA2020 Toxic Vapor analyzer is the only intrinsically safe, portable field analyzer using both Flame Ionization Detection (FID) and Photo Ionization Detection (PID) technologies.

  • Ammonia Analyzer - Trace (NH<sub>3</sub>)
    Ammonia Analyzer - Trace (NH3)

    LGR's new Ammonia Analyzer - Trace (AAT) provides fast measurements of ammonia in ambient air with unparalleled precision, sensitivity and time response. No longer do you have to wait for minutes before getting a reliable reading – LGR’s AAT provides measurements at 10 Hz with sub-ppb precision. In addition, the AAT can report measurements quickly over a wide range of ammonia concentrations. For your convenience, we offer two versions of the AAT. If you require the fastest response rate possible (data rate up to 10 Hz), you will want to use our Ammonia Analyzer - Trace (Fast Flow). For applications requiring measurements of NH3 with highest accuracy, you’ll want the Ammonia Analyzer – Trace (Enhanced Performance).

  • TrojanUVSigna&trade; &mdash; Wastewater Disinfection System
    TrojanUVSigna™ — Wastewater Disinfection System

    Chlorine is not the only viable disinfection option for mid- and large-scale applications. With the TrojanUVSigna™, operators and engineers can confidently choose UV and benefit from its inherent safety features, cost-saving advantages and disinfection performance.

More Featured Products

ACROSS THE WIRE

More Across The Wire

FEATURED SUPPLIERS

Tri-Mer Corporation Tri-Mer Corporation

Tri-Mer's focus is advanced pollution control technology combined with turnkey project delivery services. The Tri-Mer complex of manufacturing, engineering, project management, and corporate services is located in Owosso, about 90 miles from the Detroit airport. Large scale semi-automated steel fabrication and plastics manufacturing is housed in multiple bays with over 200,000 sq. ft. of production capacity.

 

ATTENTION BOILER OWNERS

  • EPA No Longer Accepting Paper Submittals

    EPA is no longer accepting paper submittals of the Notification of Compliance Status (NOCS) for Energy Assessments for area source boilers. We now require the NOCS to be submitted electronically to the Compliance and Emissions Data Reporting Interface (CEDRI). For further information, please see the implementation videos.

  • EPA And Industry Fail To Settle Waste Unit Risk Policy Fight

    The US Environmental Protection Agency (EPA) and industry groups including cement producers have failed to settle a permit dispute that is testing whether the agency has the authority to require operators of hazardous waste combustion units to conduct risk assessments that can be used to strengthen emissions limits for mercury and other pollutants when renewing the facilities' existing waste and air permits. Negotiations stalled during a meeting in November 2013 between EPA lawyers and cement kiln operators at EPA's Region V offices, according to an 8 January 2014 status report the parties filed with the Environmental Appeals Board (EAB). Litigation will continue on 20 February 2014.

  • EPA Publishes Final Boiler MACT And Other Rules - Compliance Dates Set

    On January 31, 2013, U.S. EPA published the final Boiler MACT in the Federal Register. This sets the existing source compliance date as January 31, 2016.

  • EPA Reopens Public Comment Period On Reconsideration Of Startup And Shutdown Provisions

    EPA is reopening, for 60 days, the public comment period on the startup and shutdown provisions included in the November 2012 proposed updates to pollution limits for new power plants under Mercury and Air Toxics Standards.

More For Boiler Owners

SUPPLIER NEWS

More Supplier News