Ultrasonic Open Channel Flowmeter

AMETEK Drexelbrook5-1300 Series Open Channel Flowmeter uses advanced ultrasonic technology to provide an accurate, money-saving flowrate measurement. And, it's simple and low cost.Calibration in 90 seconds...
A key design criteria was simplicity and this system can be calibrated in only 90 seconds with virtually no training required. And, calibration is done directly in engineering units.Field Selectable Characterizations...
Flow characterization for common flumes and weirs is directly selected via decade switch positions. The standard 4-20 mA output directly represents flowrate.The Safety Issue - Ideal in explosion-hazard areas...
The electronic unit's standard 5 inch explosion-proof housing can be safely opened for calibration because this system is calibrated without power. This feature eliminates the need to "sniff" the area and ensures complete personnel safety.Versatility...

The standard unit can be configured for common flumes and weir or can be used for standard level measurements such as chemical storage tanks, etc. This makes specifying and spare parts inventory simple.

Set and Forget...
After a simple installation and calibration procedure, there is no recommended routine maintenance. <%=company%>
205 Keith Valley Road
Horsham, PA 19044-1499
Tel: 215-674-1234
Fax: 215-674-2731