INDUSTRY NEWS

More News

FEATURED PRODUCTS

  • Product Recovery System
    Product Recovery System The Keck Product Recovery System incorporates a stainless steel pump that has a field-replaceable bladder
  • Ammonia Analyzer - Trace (NH<sub>3</sub>)
    Ammonia Analyzer - Trace (NH3)

    LGR's new Ammonia Analyzer - Trace (AAT) provides fast measurements of ammonia in ambient air with unparalleled precision, sensitivity and time response. No longer do you have to wait for minutes before getting a reliable reading – LGR’s AAT provides measurements at 10 Hz with sub-ppb precision. In addition, the AAT can report measurements quickly over a wide range of ammonia concentrations. For your convenience, we offer two versions of the AAT. If you require the fastest response rate possible (data rate up to 10 Hz), you will want to use our Ammonia Analyzer - Trace (Fast Flow). For applications requiring measurements of NH3 with highest accuracy, you’ll want the Ammonia Analyzer – Trace (Enhanced Performance).

  • Remove Inorganic Contaminants From Groundwater And Industrial Wastewater With Our Wastewater Ion Exchange (WWIX) Services
    Remove Inorganic Contaminants From Groundwater And Industrial Wastewater With Our Wastewater Ion Exchange (WWIX) Services

    Utilizes ion exchange resin canisters for the removal of dissolved heavy metals from a variety of rinse water and wastewater streams.

  • SOLVAirĀ® Select 200 trona For Removal Of HCl, SO<sub>2</sub> and SO<sub>3</sub>
    SOLVAirĀ® Select 200 trona For Removal Of HCl, SO2 and SO3

    SOLVAir Select 200 trona (a natural form of sodium sesquicarbonate) offers a high-assay, low-cost alternative to acid neutralization.

  • Reverse Osmosis System
    Reverse Osmosis System The full-scale High Efficiency Reverse Osmosis (HERO) system has been designed for treating industrial wastewater at a metals smelter
  • High Volume Small Surface Sampler (HVS3)
    High Volume Small Surface Sampler (HVS3) The HVS3 is the ASTM standard method for recovering (potentially contaminated) dust samples from surfaces for chemical analysis. Envirometrics has an HVS3 available for short-term rental.
More Featured Products

ACROSS THE WIRE

More Across The Wire

FEATURED SUPPLIERS

ABB Measurement & Analytics ABB Measurement & Analytics

ABB is a technology-based provider of power and automation products, systems, solutions, and services. Building on our core strengths of technology leadership, pioneering spirit and a sustainable approach to business, ABB helps our customers to become more profitable while lowering environmental impact.

ATTENTION BOILER OWNERS

  • EPA No Longer Accepting Paper Submittals

    EPA is no longer accepting paper submittals of the Notification of Compliance Status (NOCS) for Energy Assessments for area source boilers. We now require the NOCS to be submitted electronically to the Compliance and Emissions Data Reporting Interface (CEDRI). For further information, please see the implementation videos.

  • EPA And Industry Fail To Settle Waste Unit Risk Policy Fight

    The US Environmental Protection Agency (EPA) and industry groups including cement producers have failed to settle a permit dispute that is testing whether the agency has the authority to require operators of hazardous waste combustion units to conduct risk assessments that can be used to strengthen emissions limits for mercury and other pollutants when renewing the facilities' existing waste and air permits. Negotiations stalled during a meeting in November 2013 between EPA lawyers and cement kiln operators at EPA's Region V offices, according to an 8 January 2014 status report the parties filed with the Environmental Appeals Board (EAB). Litigation will continue on 20 February 2014.

  • EPA Publishes Final Boiler MACT And Other Rules - Compliance Dates Set

    On January 31, 2013, U.S. EPA published the final Boiler MACT in the Federal Register. This sets the existing source compliance date as January 31, 2016.

  • EPA Reopens Public Comment Period On Reconsideration Of Startup And Shutdown Provisions

    EPA is reopening, for 60 days, the public comment period on the startup and shutdown provisions included in the November 2012 proposed updates to pollution limits for new power plants under Mercury and Air Toxics Standards.

More For Boiler Owners

SUPPLIER NEWS

More Supplier News