Product/Service

Model 200/1 Hydrocarbon Analyzer

Source: VIG Industries, Inc.
The new VIG Industries, Inc. Model 200/1 is a microprocessor based, oven heated methane / non-methane hydrocarbon analyzer for high accuracy, sensitivity and stability
The new VIG Industries, Inc. Model 200/1 is a microprocessor based, oven heated methane / non-methane hydrocarbon analyzer for high accuracy, sensitivity and stability. The Model 200/1 continually measures methane and non-methane hydrocarbons at preset intervals. VIG's Model 200/1 uses one(1) Flame Ionization Detector (FID) to obtain methane and non-methane hydrocarbon readings. A sample is fed to the analyzer via an internal heated pump. After the sample reaches the analyzer, a portion of the sample is trapped and fed through a column to separate the methane from the total and is fed to the FID detector for analysis. As soon as the methane is read, the remaining sample is backfluhed through the column and fed to the FID detector for analysis of  the non-methane component. The LCD display indicates the amount of methane and non-methane hydrocarbons.

The Model 200/1 utilizes one flame ionization detector (FID). The detector, all sample lines, column and all solenoid valves that come in contact with the sample are maintained in a controlled, heated oven to prevent condensation, and to provide reliable performance in the analysis of concentrations of wide varieties of hydrocarbons in gaseous mixtures and in ambient air.

Applications

  • Process Monitoring - continuous monitoring and alarm or control of: process gas streams utilizing organic solvents, crude oil and other chemicals containing hydrocarbons, etc....
  • Efficiency Monitoring - monitoring effluent of V.O.C. reduction for environmental compliance. Efficiency control of incinerators (thermal or catalytic), scrubbers, carbon adsorbers, and other abatement equipment.
  • Safety Monitoring-L.E.L. (lower explosive limit) - monitoring and/or control of ovens/dryers, fugitive emissions monitoring, personnel work area monitoring, leak detection of process equipment or solvent storage areas.

Features

  • Easy to use software
  • GC technology used for separation
  • Automatic fuel and sample shut-off system
  • Automatic flame-out indicator
  • Adjustable alarm and oven settings
  • Precision 1% of full scale
  • Fast response - minimum 2.5 minute cycle
  • Two stage sample filter with exchangeable stainless steel elements
  • Teflon isolated detector
  • 19" rack or bench mount
  • Heated Sample pump
  • Outputs 0-1, 0-5, or 0-10Volts

VIG Industries, Inc., 15010 Sierra Bonita Lane, Chino, CA 91710. Tel: 909-606-4100; Fax: 909-606-0432.