Model 200 Hydrocarbon Analyzer
Source: VIG Industries, Inc.
The new VIG Industries, Inc. Model 200 is a microprocessor
based, oven heated total
hydrocarbon & methane / non-methane analyzer for high accuracy,
sensitivity and stability
The new VIG Industries, Inc. Model 200 is a microprocessor
based, oven heated total
hydrocarbon & methane / non-methane analyzer for high accuracy,
sensitivity and stability. The Model 200 continually measures both
methane and total hydrocarbons. VIG's Model 200 uses two independent
Flame Ionization Detectors (FID's) to obtain methane and total
hydrocarbon readings. A sample is fed to the analyzer via an
internal heated pump. After the sample reaches the analyzer, a
portion of the sample is trapped and fed through a column to separate
the methane from the sample. Any remaining sample is backfluhed
through the column to ensure a contaminant free column. The methane
and untrapped samples are fed directly to the FID's for analysis of
methane and total hydrocarbons. Methane is then subtracted from the
total hydrocarbons to display a non-methane reading. The LCD display
also indicates the amount of methane and total hydrocarbons.
The Model 200 utilizes two flame ionization detectors (FID's). The detectors, all sample lines, column and all solenoid valves that come in contact with the sample are maintained in a controlled, heated oven to prevent condensation, and to provide reliable performance in the analysis of concentrations of wide varieties of hydrocarbons in gaseous mixtures and in ambient air.
Applications
- Process Monitoring - continuous monitoring and alarm or control of: process gas streams utilizing organic solvents, crude oil and other chemicals containing hydrocarbons, etc....
- Efficiency Monitoring - monitoring effluent of V.O.C. reduction for environmental compliance. Efficiency control of incinerators (thermal or catalytic), scrubbers, carbon adsorbers, and other abatement equipment.
- Safety Monitoring-L.E.L. (lower explosive limit) - monitoring and/or control of ovens/dryers, fugitive emissions monitoring, personnel work area monitoring, leak detection of process equipment or solvent storage areas.
Features
- Easy to use software
- GC technology used for separation
- Automatic fuel and sample shut-off system
- Automatic flame-out indicator
- Adjustable alarm and oven settings
- Precision 1% of full scale
- Fast response - minimum 2.5 minute cycle
- Two stage sample filter with exchangeable stainless steel elements
- Teflon isolated detector
- 19" rack or bench mount
- Heated Sample pump
- Outputs 0-1, 0-5, or 0-10Volts
VIG Industries, Inc., 15010 Sierra Bonita Lane, Chino, CA 91710. Tel: 909-606-4100; Fax: 909-606-0432.
This website uses cookies to ensure you get the best experience on our website. Learn more