Product/Service

Mighty Mini Oil Skimmers For Parts Washers And CNC Machines

Source: Abanaki Corporation - Oil Skimmer Division
The Abanaki Mighty Mini SST Oil Skimmer can remove 1 to 2 gallons of medium weight oil per hour. Its stainless steel construction enables it to operate in harsh chemicals and heat while its integrated timer lets it run only when needed

Visit our Website

The Mighty Mini Oil Skimmer is the ideal solution to removing oil in coolants and parts washers therefore extending the life of cooling and wash water! This Oil Skimmer can remove 1 to 2 gallons of medium weight oil per hour (depending on belt selection). Its stainless steel construction enables it to operate in harsh chemicals and heat while its integrated timer lets it run only when needed. The Mighty Mini SST Oil Skimmer is designed to minimize water content in the disposed oil; however the optional Oil Concentrator® will further reduce the water content in the oil to less than 2%. This is a tremendous cost saving if the oil is to be recycled or disposed.

The Mighty Mini Oil Skimmer is compact making efficient use of available space... it fits underneath most CNC machines as well as inside parts washers. The small footprint even allows the Mighty Mini SST to fit through the bung hole of a 55 gallon drum! With belts specifically selected for your application available in lengths of 6, 12, 18 and 24", this skimmer has endless application possibilities.

The Mighty Mini SST Oil Skimmer weighs in at only 8 pounds and the ease of installation make this skimmer the most versatile of our line. Use it here today and there tomorrow as it installs in just seconds.

Features

  • Integrated 24 hour timer
  • Fan cooled motor
  • Belts available 1" and 2" wide; materials specifically selected for your application (see Belt Selection page)
  • Both sides of belt are wiped for better efficiency
  • Chip resistant, baked on, powder-coated base and housing
  • Spring loaded stabilizer bar
  • 3-foot clear discharge hose and clamp
  • 8-foot grounded power cord w/plug
  • Stainless steel construction
Advantages
  • Smallest and lightest of the Abanaki skimmer line
  • Easily hand carried to the source of the problem
  • Removes oil at rates up to 2 gallons per hour
  • Designed for tank depths from 6" to 24"
  • Belt and tail pulley can fit through a 2" diameter bung hole
  • Great for automotive and mobile equipment service shops
  • VERY affordable even for small businesses