White Paper | November 18, 2014

How To Quantify Impurities In Ultra-High Purity Gases

Source: MIDAC Corporation

A Fourier transform infrared spectrometer was built by MIDAC Corporation specifically to identify and quantify impurities in ultra-high purity nitrogen, helium, argon and instrument air. One of the difficulties with optical measurements is that a purge must be maintained on the optical enclosure, which due to its large surface area and material composition tends to off-gas, releasing water and carbon dioxide as well as other contaminants.

The problem of the instrument purge was tackled using an ultra-high vacuum. The vacuum system is integral to the instrument, with a turbo molecular pump fixed beneath the optical enclosure. These, together with a number of other refinements, have resulted in more accurate and precise results than were previously possible, driving detection limits lower.

The detection limits were estimated using the procedure defined in the ASTM Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy Appendix 2.

For full access to this content, please Register or Sign In.

Access Content Detection Limits Of Impurities In Zero Gases By FTIR
Newsletter Signup
Newsletter Signup
Get the latest industry news, insights, and analysis delivered to your inbox.
Join your peers
By clicking Sign Me Up, you agree to our Terms and that you have read our Privacy Policy.