CLD 700 EL Chemiluminescence Analyzer
Technology that makes an impression.
The special feature of this measuring instrument is the concept of two parallel reaction chambers. They permit simultaneous measurement of NO and NOx, allowing the instrument to display precise NO2 values without delay. The chambers are secured by means of a single screw and, consequently, easily accessible for quick cleaning when necessary.
Pressure variations in the sample, which can occur where industrial applications are involved, are regulated out with the assistance of a refined bypass system. The analyzer conforms not only to the highest mechanical standards but is also state-of-the-art in terms of its electronics. For example periodic zero-point measurement, and synchronization of the two channels by means of an optical positioning procedure guarantee a high level of signal stability.
Very simple operation.
The user can operate the instrument by means of the built-in keyboard or through a PC. The options extend from setting the parameters with which, for example, the automatic calibration should operate, to switching individual modules on and off. Manual operation of the CLD 700 EL, with the keyboard, is guided by a simple menu-structured software.
Application examples.
Gas producers
Test and calibration points
Chemical industry
Waste incineration plants
Cement producers
Paper and timber products
Glass and porcelain manufacturers
The CLD 700 EL is frequently used in installations which measure a range of waste gases and have a sample gas treatment facility. Waste incineration plants provide a typical example of this. Sample treatment in this case is essential because of the agressive gases present. If necessary, we can also supply you with a sample gas cooler together with the instrument.
ECO PHYSICS, INC., 3915 Research Park Drive, Suite A-3, Ann Arbor, MI 48108-2200. Tel: 734-998-1600; Fax: 734-998-1180